Blackweb Universal Remote Codes

If you have bought Blackweb TV and lost its remote then you don’t need to worry. You just need to buy a universal remote control. To use a universal remote, you need to program it with your black web TV. For the program, you must have the Blackweb universal remote codes. Here are given all the blackweb universal remote codes https://myuniversalremotecodes.com/magnavox-tv-remote-codes/.

Blackweb universal remote code list with brands

Brand NameBlackweb Remote Codes
Affinity2078, 2077
Axion0177
AOC2063, 2091
Admiral0020, 0001, 2120, 0135
Acer1817, 1163
Advent0116, 1160, 1181, 0176, 2354, 0167, 2434
Akai0231, 2451, 2415, 0076, 2494, 2487, 1148, 0214, 1137, 2488, 2012, 1138, 1139
Changhong2431
Cornea0050
Daewoo0444, 0252, 0140, 0130, 0039, 2406, 0042, 2209, 0010, 0019, 0018, 0017, 0004, 3023, 0126, 0127, 0009, 2152, 0080, 3022, 0043, 2094, 0100, 0138, 0244
Dell2377, 0132, 2187, 0028, 2358, 2363
Dynex1181, 0135, 2461, 1171, 2351
Emerson0259, 0249, 0231, 0130, 0040, 0037, 0032, 0023, 3022, 1172, 1173, 0004, 2467, 3109, 2455, 3110, 2324, 2454, 2472, 2423, 2477, 0198, 1141, 3014, 2471, 0027, 0034, 0039, 0045, 0179, 0237, 0252
Gateway0046, 2116
Haier0935, 3106, 0157, 3001, 0217, 2502, 0077, 0216, 1147, 0081
HP1015, 1004
Hisense2503, 1176, 0073, 0004, 0077, 2463, 1173, 3537, 0182, 2060, 2464, 0216, 1016
Hyundai1134
Kenwood0009, 0004

Programming of Blackweb Universal remote with manual method

  1. Turn ON the device.
  2. Click the TV button on the universal remote.
  3. Press and hold the SETUP button of the remote until a light flash appears.
  4. Enter the keycode that you have chosen from the code list.
  5. Press and hold the POWER button while pointing the remote at the TV.
  6. When the screen switches off, release the button.

Programming of Blackweb Universal Remote with code search

  1. Turn ON the device
  2. Press and hold the setup button.
  3. Enter the three-digit code (9-9-1)
  4. Hold the power button on the remote and click on the channel up button until the TV turns Off.

Programming of Blackweb Universal remote without codes

All the universal remote codes are scanned in the auto search method. One code will scan at a time.

  1. Turn the device ON that you want to program with the remote.
  2. Tap on the DEVICE button for 3 seconds. The LED light would appear indicating the device is ready to program
  3. Press on CH+ and CH- while pointing the universal remote at the TV. press up and down continuously until the device turns off.
  4. Click on the POWER button to verify the code. Try to change the channel to verify that the remote is programmed correctly or not.
  5. Press the DEVICE button to save the code. The LED light will appear to be blinking twice indicating that the code is stored successfully.

Conclusion

All of the ways to program your remote with Blackweb TV are given above. Follow all the simple steps and program your remote and start using it. It is so easy to handle it.

Leave a Reply

Your email address will not be published.